Premier Poly-Cut™, Poly-Cut™ and Poly-Form™ do not contain wax, active or inactive sulfur, phenol, fluorocarbons, boron, phosphorus, mercury or any heavy metals, Teflon ®, or silicone. Contains 3ppm chloride and less than 1ppm fluoride. Therefore, they can be used on finished parts for atomic reactors, space craft, aircraft and jet or rocket engines.
Premier Poly-Cut™ has antibacterial and anti-fungal properties that are built-in to inhibit the growth of bacteria and fungus that may affect this product. Together, they insure the longest sump life possible (six months or longer in most cases.) Premier Poly-Cut™ works remarkably well in machining steel, aluminum, copper alloys, zinc, tool steel, Inconel ® and other nickel and chrome base alloys. It dissipates heat better than any other product on the market and, with the polymer additives, will eliminate welding or chip build-up on your inserts and end-mills giving an exceptional finish. When machining aluminum, Premier Poly-Cut™ will provide a superior finish much like kerosene and oil but without the hazards. Our products are also highly recommended for grinding carbide and gummy tool steels using a vitrified bonded wheel, without loading. Premier Poly-Cut™ will not stain or corrode ferrous metals, nonferrous metals, plastics, ceramics, rubber or titanium. This product is clean to work with and will not smoke, stain skin or clothing or cause dermatitis.
Available in: 1-Gallon Jugs, 5-Gallon Pails and 55-Gallon Drums
|
Application: |
Cutting Metals Over 30 Rc | Cutting Most Metals and Plastics | Grinding |
|
Dilution: |
15:1 | 20:1 | 30:1 |
|
Refractometer Reading: |
2.5 | 2.0 | 1.5 |
Premier Poly-Cut™ and Poly-Cut™are virtually the same products with the difference being that Premier Poly-Cut™ contains much stronger antibacterial and anti-fungal additives. We recommend Poly-Cut™ for use in band saws or other similar flood-type machining where the coolant/lubricant is not being recaptured. Poly-Cut™ works well in machining steel, aluminum, copper alloys, zinc, tool steel, Inconel ® and other nickel and chrome base alloys. It dissipates heat better than any other product on the market and, with the polymer additives, will eliminate welding or chip build-up on your inserts and end-mills giving an exceptional finish. When machining aluminum, Poly-Cut™ will provide a superior finish much like kerosene and oil but without the hazards. Our products are also highly recommended for grinding carbide and gummy tool steels using a vitrified bonded wheel, without loading. Poly-Cut™ will not stain or corrode ferrous metals, nonferrous metals, plastics, ceramics, rubber or titanium. This product is clean to work with and will not smoke, stain skin or clothing or cause dermatitis.
Available in: 55-Gallon Drums
|
Application: |
Cutting Metals Over 30 Rc | Cutting Most Metals and Plastics | Grinding and Spray Mist |
|
Dilution: |
15:1 | 20:1 | 30:1 |
|
Refractometer Reading: |
2.5 | 2.0 | 1.5 |
Poly-Form™ is a water-soluble polymer lubricant for CNC turret and high-speed punch presses. Our product has better viscosity than water-soluble oil and cools better than straight drawing oil so it works very well for blanking and forming operations. Poly-Form™ is an excellent lubricant for soft nonferrous metals, such as aluminum, copper and brass, and will protect your nonferrous metals from oxidation, including galvanized and tin-plate. This product is also clean to work with and will not smoke, stain skin or clothing or cause dermatitis.
Available in: 1-Gallon Jugs, 5-Gallon Pails and 55-Gallon Drums
|
Application |
Precoating | Blanking and Forming | Drawing While Flooding Die | Punching |
|
Dilution |
1:1 | 4:1 | 4:1 | 10:1 |
Poly-Oil™ works remarkable well in thread rolling, thread chasing and thread tapping of stainless steel, tool steel, cold roll, hot roll, Inconel® and other nickel or chrome-base alloys. With our exclusive polymer additive, Poly-Oil™ will eliminate welding or chip build-up on your taps and chasers, giving you an exceptional thread. Since Poly-Oil™ contains no sulfur or chlorinated compounds, it will smoke less than other sulfurized threading oils and is relatively clean with which to work.
Available in: 1-Gallon Jugs, 5-Gallon Pails and 55-Gallon Drums